Jump to content

shashkes

Verified Members
  • Posts

    16
  • Joined

  • Last visited

Reputation

0 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. This is showing in the headset so i have no way to show you, it says "connection timeout" @chengnay @Tony PH Lin
  2. BTW I tried to get this to work on another computer and after updating Nvidia drivers there and starting the server i'm still getting a time out error. Can there be something wrong with the headset?
  3. so I got some advice from someone else at vive that seemed to help actually start the sever but still getting time out errors, and yes i checked the ip of the device and reinstalled and went through the process you outlined. The advice i got was to go into Nvidia control panel and make sure the gpu of NVIDIA was selected (in mine it was on auto select, you can see the image attached). I needed to re enable the intel card to get into nvidia control panel. This is the log that i get now, so you see nvidia is in [0] location and it seems to actually start. after I start device apk should it say connected? Is there some time limit that i need to start unity while it is trying to connect? I've been trying different things but nothing works 😞 it seems so close now that server is starting. The server config:.\config\serverSetting.setting is loaded! The HmdList is loaded! 1 2 OnPipeInfo : Pipe Server Started Pipe accept begin. [2020-10-16 14:43:08.312 -7 4152 DEBUG logger] [Main] Set Log level as DEBUG [2020-10-16 14:43:08.318 -7 4152 INFO logger] [Main]dpServer Version: 0.4.5.3 [2020-10-16 14:43:08.318 -7 4152 INFO logger] [Main]Init() Config from json: H265:false, Bitrate:23000000, GOP:100, EncodeHQ true, AllIFrame false , ForceToSendTexture false, WaitDecodeDoneTimeOut 40 ms, fps 75,LogToFile:false,RTPPayloadSize:1400 [2020-10-16 14:43:08.324 -7 4152 INFO logger] [Main] GetGpuType() There are 3 adapter [2020-10-16 14:43:08.325 -7 4152 INFO logger] [Main] GetGpuType() The GPU [0] is Nvidia! [2020-10-16 14:43:08.325 -7 4152 DEBUG logger] OnPipeInfo(): Pipe Server Started [2020-10-16 14:43:08.466 -7 4152 INFO logger] [CServerIns]openServer() url:rtsp://192.168.137.1:6555/live [2020-10-16 14:43:08.469 -7 13668 INFO logger] GetMixFormat() ----- from audio end point -----, wFormatTag:65534 [2020-10-16 14:43:08.469 -7 13668 INFO logger] nChannels:2 [2020-10-16 14:43:08.470 -7 13668 INFO logger] nSamplesPerSec:48000 [2020-10-16 14:43:08.470 -7 13668 INFO logger] nAvgBytesPerSec:192000 [2020-10-16 14:43:08.470 -7 13668 INFO logger] nBlockAlign:4 [2020-10-16 14:43:08.470 -7 13668 INFO logger] wBitsPerSample:16 [2020-10-16 14:43:08.470 -7 13668 INFO logger] cbSize:22 [2020-10-16 14:43:08.470 -7 13668 INFO logger] wValidBitsPerSample:16 [2020-10-16 14:43:08.470 -7 13668 INFO logger] wSamplesPerBlock (valid if wBitsPerSample ==0):16 [2020-10-16 14:43:08.470 -7 13668 INFO logger] GetMixFormat : PCM data [2020-10-16 14:43:08.476 -7 13668 INFO logger] GetBufferSize :48000
  4. Server is connected! but i'm still getting time out error after installing the device apk 😞 I've tried stopping everything and starting it and still not connecting... so close, uploading direct config preferences too The HmdList is loaded! 1 2 OnPipeInfo : Pipe Server Started Pipe accept begin. [2020-10-16 01:53:16.736 -7 6100 DEBUG logger] [Main] Set Log level as DEBUG [2020-10-16 01:53:16.743 -7 6100 INFO logger] [Main]dpServer Version: 0.4.5.3 [2020-10-16 01:53:16.743 -7 6100 INFO logger] [Main]Init() Config from json: H265:false, Bitrate:23000000, GOP:100, EncodeHQ true, AllIFrame false , ForceToSendTexture false, WaitDecodeDoneTimeOut 40 ms, fps 75,LogToFile:false,RTPPayloadSize:1400 [2020-10-16 01:53:16.748 -7 6100 INFO logger] [Main] GetGpuType() There are 3 adapter [2020-10-16 01:53:16.748 -7 6100 INFO logger] [Main] GetGpuType() The GPU [0] vendor id is 5140, vendor description is Microsoft Basic Render Driver [2020-10-16 01:53:16.749 -7 6100 INFO logger] [Main] GetGpuType() The GPU [1] is Nvidia! [2020-10-16 01:53:16.750 -7 6100 DEBUG logger] OnPipeInfo(): Pipe Server Started
  5. any instructions on how to do that and how that will affect my computer?
  6. ok that was a big adventure, i used DDU to uninstall the Nvidia (i don't think i have an AMD driver) and then reinstalled but still getting the same error 😞
  7. Unity 2018.4 LTS + Wave SDK 3.1.94 as recommended here:
  8. Hi, thanks for your support, i ran the server from cmd and got the log below with the errror that Nvidia drivers might be too old. I updated my nvidia drivers using Nvidia Geforce app to latest driver. version is now 456.71 released 10/7/2020. I restarted the computer and ran the server again but still getting the same error that Nvidia driver may be too old. any idea what is going on? The server config:.\config\serverSetting.setting is loaded! The HmdList is loaded! 1 2 OnPipeInfo : Pipe Server Started Pipe accept begin. [2020-10-15 13:45:09.903 -7 12488 DEBUG logger] [Main] Set Log level as DEBUG [2020-10-15 13:45:09.907 -7 12488 INFO logger] [Main]dpServer Version: 0.4.5.3 [2020-10-15 13:45:09.908 -7 12488 INFO logger] [Main]Init() Config from json: H265:false, Bitrate:23000000, GOP:100, EncodeHQ true, AllIFrame false , ForceToSendTexture false, WaitDecodeDoneTimeOut 40 ms, fps 75,LogToFile:false,RTPPayloadSize:1400 [2020-10-15 13:45:09.916 -7 12488 INFO logger] [Main] GetGpuType() There are 3 adapter [2020-10-15 13:45:09.916 -7 12488 INFO logger] [Main] GetGpuType() The GPU [0] vendor id is 32902, vendor description is Intel(R) UHD Graphics 630 [2020-10-15 13:45:09.917 -7 12488 INFO logger] [Main] GetGpuType() The GPU [1] is Nvidia! [2020-10-15 13:45:09.918 -7 12488 DEBUG logger] OnPipeInfo(): Pipe Server Started [2020-10-15 13:45:09.960 -7 12488 ERROR logger] [Main]Init() Nvidia driver may be too old, please update to the latest version driver and try again. [2020-10-15 13:45:09.961 -7 12488 ERROR logger] [Main]Init() fail,so break
  9. I'm pretty sure the dpserver.exe isn't launching the server the command prompt flickers on for a second and then closes even when i try running it directly from the file system. Any ideas why?
  10. I think the timeout error just appeared behind my head so I thought it was a black screen ...
  11. I stopped the build and the server and started again just to get the time out error again. but even when its timed out the device controls the unity view. is there a way to see if the server is running. the cmd window immediately closes when i run the server from unity. can i run it manually instead of from unity?
  12. Thanks... some progress... the headset is now controlling the view in unity... when i move it the view moves but inside the headset its total black screen
  13. i've also tried ip config and put in the two ipv4 different addresses Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::6992:5893:3ac1:c2b2%5 IPv4 Address. . . . . . . . . . . : 192.168.137.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Wireless LAN adapter Wi-Fi 2: Connection-specific DNS Suffix . : hsd1.ca.comcast.net IPv6 Address. . . . . . . . . . . : 2601:643:8301:6510::6c60 IPv6 Address. . . . . . . . . . . : 2601:643:8301:6510:d5cf:555a:b442:51a9 Temporary IPv6 Address. . . . . . : 2601:643:8301:6510:bdcd:736e:bff0:d009 Link-local IPv6 Address . . . . . : fe80::d5cf:555a:b442:51a9%8 IPv4 Address. . . . . . . . . . . : 10.0.0.148 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : fe80::1256:11ff:fec6:6939%8 10.0.0.1
  14. I'm following the documentation. trying to find my device IP with adb shell ifconfig I get the long message bellow. is my device ip 127.0.0.1 or 10.0.0.245? i tried both, built a new apk each time to the headset, then started sever, a window pops up for a second and closes, then I start device apk and a message "connecting..." and timeout error do i need to disable windows firewall or something? - lo Link encap:UNSPEC - inet addr:127.0.0.1 Mask:255.0.0.0 - inet6 addr: ::1/128 Scope: Host - UP LOOPBACK RUNNING MTU:65536 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1 - RX bytes:0 TX bytes:0 - dummy0 Link encap:UNSPEC - inet6 addr: fe80::4ca6:37ff:fe3c:c054/64 Scope: Link - UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:84 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:0 TX bytes:5880 - wlan0 Link encap:UNSPEC - inet addr:10.0.0.245 Bcast:10.0.0.255 Mask:255.255.255.0 - inet6 addr: fe80::b6ce:f6ff:fe3c:9ad4/64 Scope: Link - inet6 addr: 2601:643:8301:6510:c60:902:8eab:eeef/64 Scope: Global - inet6 addr: 2601:643:8301:6510:51c1:ed00:6504:1fb/64 Scope: Global - inet6 addr: 2601:643:8301:6510:b6ce:f6ff:fe3c:9ad4/64 Scope: Global - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:206208 errors:0 dropped:0 overruns:0 frame:0 - TX packets:29738 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:3000 - RX bytes:106618343 TX bytes:4440951 - p2p0 Link encap:UNSPEC - UP BROADCAST MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:3000 - RX bytes:0 TX bytes:0
×
×
  • Create New...