Vive Business Streaming 1.08.3 - Beta Release notes

[C.T.]

VIVE Business Streaming Software - 1.08.3 – Release notes
Released June 20^th, 2022

Console – 1.08.3

• Dynamic bitrate
  Adaptively adjust bitrate according to transmission status to improve wireless streaming experience. Now supports both Nvidia & AMD GPUs.
• Modified dynamic bitrate toggle UX behavior.
  Now you will be able to adjust the max bitrate while dynamic bitrate is enabled.
• Refined VBS client installation UI and UX behavior.

Client - 1.0.11.3a (Please connect Focus 3 to PC via USB to update)

• Improved TCP mode stability.

[thedrone]

I've been having stability issues with the most recent VBS version. Everything starts off working perfectly and then after about 10 minutes or so, It starts lagging and artifacting to the point of no longer being usable and it will not recover. I've had one 45 minute session without serious interruption, but other than that I have not been able to use my device. Prior to this update, I experienced only minor hiccups. I've been troubleshooting for a while but have not found a solution yet. Things I've tried:

1. Updated my router's firmware (Asus RT-AX56U).
2. Set wireless mode to AX only and channel bandwidth to 80mhz.
3. Enabled high performance mode in-headset.
4. Switched between various control channels.
5. Played around with various bitrates in VBS.

I'll paste my router's log, could the error messges in bold be related?

Thanks to anyone who might be able to help. 🙂

Jun 27 14:04:13 acsd: eth5: selected_chspec is 1003 (3)
Jun 27 14:04:13 acsd: eth5: Adjusted channel spec: 0x1003 (3)
Jun 27 14:04:13 acsd: eth5: selected channel spec: 0x1003 (3)
Jun 27 14:04:13 acsd: eth5: txop channel select: Performing CSA on chspec 0x1003
Jun 27 14:05:06 wlceventd: wlceventd_proc_event(530): eth6: Auth 7E:7C:7D:63:AA:0A, status: Successful (0), rssi:0
Jun 27 14:05:06 wlceventd: wlceventd_proc_event(559): eth6: Assoc 7E:7C:7D:63:AA:0A, status: Successful (0), rssi:-46
Jun 27 14:16:44 wlceventd: wlceventd_proc_event(494): eth6: Deauth_ind 7E:7C:7D:63:AA:0A, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Jun 27 14:22:38 rc_service: cfg_server 2455:notify_rc restart_wireless
Jun 27 14:22:39 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Jun 27 14:22:39 kernel: CSIMON: M2M usr already registered ...
Jun 27 14:22:39 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Jun 27 14:22:39 kernel: CSIMON: M2M usr already registered ...
Jun 27 14:22:39 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Jun 27 14:22:39 kernel: CSIMON: M2M usr already registered ...
Jun 27 14:22:39 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Jun 27 14:22:39 kernel: CSIMON: M2M usr already registered ...
Jun 27 14:22:39 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Jun 27 14:22:39 kernel: CSIMON: M2M usr already registered ...
Jun 27 14:22:39 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Jun 27 14:22:39 kernel: CSIMON: M2M usr already registered ...
Jun 27 14:22:40 wlceventd: main(964): wlceventd Start...
Jun 27 14:22:40 acsd: eth5: Selecting 2g band ACS policy
Jun 27 14:22:43 acsd: eth5: selected channel spec: 0x1003 (3)
Jun 27 14:22:43 acsd: eth5: Adjusted channel spec: 0x1003 (3)
Jun 27 14:22:43 acsd: eth5: selected channel spec: 0x1003 (3)
Jun 27 14:22:43 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_INIT
Jun 27 14:22:50 roamast: ROAMING Start...
Jun 27 14:41:07 acsd: eth5: selected_chspec is 1004 (4)
Jun 27 14:41:07 acsd: eth5: Adjusted channel spec: 0x1004 (4)
Jun 27 14:41:07 acsd: eth5: selected channel spec: 0x1004 (4)
Jun 27 14:41:07 acsd: eth5: txop channel select: Performing CSA on chspec 0x1004