DennisSSDev Posted April 30, 2018 Share Posted April 30, 2018 Just downloaded the SRWorks SDK to run one of the example projects, but faced with a dark scene and a white curved screen in front of me. I suppose this shouldn't be happenning as I've tried to scan the enviroment and no meshes have appeared. Here is the error that I see from the SRWorks logger: [DEVICE_VIVE2_MODE2_0] [2018-04-30 17:02:36] [-!-ERROR-!-] [code: 0x9C42] M_MSCD_AcViStSrv_40002 @SteamCameraDevice::start:31 Any Suggestions?? Link to comment Share on other sites More sharing options...
HackPerception Posted May 2, 2018 Share Posted May 2, 2018 , Are you on the most recent Vive Pro Firmware and Nvidia drivers? , have you seen this error? Link to comment Share on other sites More sharing options...
dario Posted May 2, 2018 Share Posted May 2, 2018 Make sure you see the stereo camera in SteamVR aettings - camera - test. If you don't, try restarting Link to comment Share on other sites More sharing options...
Totobro Posted May 2, 2018 Share Posted May 2, 2018 I see it. Link to comment Share on other sites More sharing options...
dario Posted May 2, 2018 Share Posted May 2, 2018 Yes, make sure to see the stereo camera view from SteamVR Settings -> Camera -> Test If not keep restarting until you do Link to comment Share on other sites More sharing options...
DennisSSDev Posted May 2, 2018 Author Share Posted May 2, 2018 Hi , that's exactly what was causing the issue. The camera was not enabled. Excuse me for the lack of preconfiguration knowledge, just started out with the API ;) Maybe it would be a good idea to explicitly mention the setting in the documentation? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.