Tony PH Lin Posted July 3, 2018 Share Posted July 3, 2018 Since there is no 2D Android Setting AP on your ROM, please try this command adb shell am start -a android.intent.action.MAIN -c android.intent.category.LAUNCHER com.android.settings If this command does not work, try install the Android Setting AP. You can search from internet how to get Android Setting AP. Thanks. Link to comment Share on other sites More sharing options...
Netvr Posted July 3, 2018 Share Posted July 3, 2018 This command shows the settings menu on headset. Maybe there should be something else? Will it help me to pair my controller? Link to comment Share on other sites More sharing options...
Tony PH Lin Posted July 4, 2018 Share Posted July 4, 2018 Yes, the controller is pairing under BT protocol so you can connect additional controller just like connect other BT devices. Thanks. Link to comment Share on other sites More sharing options...
Netvr Posted July 4, 2018 Share Posted July 4, 2018 There is a problem - I don't know how to do it for other BT devices. Probably I had to start with that. Also, I couldn't see my controller even on phone in the list of visible BT devices. Link to comment Share on other sites More sharing options...
Tony PH Lin Posted July 4, 2018 Share Posted July 4, 2018 You may take a reference from below link, and let me know if you meet other problems. https://android.gadgethacks.com/how-to/android-basics-connect-bluetooth-device-0163780/ Does your controller in pairing mode? Link to comment Share on other sites More sharing options...
Netvr Posted July 4, 2018 Share Posted July 4, 2018 In this link and in many others links like this there is an item "bluetooth" right after an item "wi-fi", but in a wave settings there is no such item, see attach. Should it be there? As I understand pairing mode for steam controller is switch on by pressing and holding app and system buttons (LED blinking). So when I switch on pairing mode on my steam controller a bluetooth on my phone coudn't find anything. Link to comment Share on other sites More sharing options...
Tony PH Lin Posted July 4, 2018 Share Posted July 4, 2018 Sorry for misleading you. I know the cause. The Steam controller (suppose it's Vive one) is using BT over proprietary protocol so it can't be recongized and treated as normal BT devices from Phone. So if you replace with other general BT devices, it should be connected. BTW, the BT setting is pop-up as 2D (not 3D in VR) so you need to use Vysor via USB from PC to select and do pairing etc. This setting page is default hidden to avoid user to disable BT, and you can use command I provide to launch back as 2D. Hope this info. is helpful. Link to comment Share on other sites More sharing options...
Netvr Posted July 4, 2018 Share Posted July 4, 2018 Thanks, now we could go next. I opened bluetooth settings by adb command: adb shell am start -a android.settings.BLUETOOTH_SETTINGS But after refresh there were only 2 LightHouse and 2 Finch3dof devices, (controller was in pair mode). Link to comment Share on other sites More sharing options...
Tony PH Lin Posted July 17, 2018 Share Posted July 17, 2018 Hi , Any new progress to connect to external controllers? Thanks. Link to comment Share on other sites More sharing options...
Netvr Posted July 17, 2018 Share Posted July 17, 2018 Tony, unfortunately no. There is still no available devices in bluetooth settings except 2 LightHouses. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.