Gamearium Posted June 27, 2018 Share Posted June 27, 2018 Hi all, How to use Vive Pro in Arcade Room ? There is a button on the new linkbox 2.0 and in Arcade Room, linkbox is in the celling. It not possible to push on the button. Any solution please ? Best regards, Philippe Gamearium Link to comment Share on other sites More sharing options...
HackPerception Posted June 27, 2018 Share Posted June 27, 2018 , the low tech solution would be tape the power button down which will effectivly make it always on. Link to comment Share on other sites More sharing options...
Gamearium Posted July 2, 2018 Author Share Posted July 2, 2018 Hi David, I have tested your solution but steam vr don't find headset after reboot if button is always pushed. The solution your provided doesn't work. Any other idea ? Regards, Philippe Link to comment Share on other sites More sharing options...
Goraxium Posted July 13, 2018 Share Posted July 13, 2018 As David said, keep the button pressed. To turn it back on (which shouldn't be necessary, unless you cut the power), all you need to do is cycle the power to the link box (turn it off and back on from the power supply). I've tested it, and it works fine on mine, which is great, because I've been trying to work out a way to clean the cables up. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.