Controller re-calibration SOP if you have drifting issue

[Tony PH Lin]

To All, 

 

If you have controller drifting issue occur, you can try to follow up below SOP to check if this can help to re-generate calibration data for controller and resolve the issue.

Thanks.

 

1. turn off HMD.
2. move controller, make ‘8’ shaped movement for magnetometer calibration. Draw 10 cycles.
3. put the controller stationary on the table for 3 minutes until the LED is off. DO NOT pull batteries out
4. press HOME button to power on controller. Power on HMD and connect controller.