Jump to content

base station htc vive alimentazione


Recommended Posts

  • 1 month later...

If you have connected a higher power supply to the base station VR 1.0 and it's no longer turning on, there could be several reasons for the fault. Here are a few things you can check to troubleshoot the issue:

  1. Check the power supply: First, make sure that the power supply you connected to the base station is the correct voltage and polarity. Verify that the voltage and current ratings of the power supply are suitable for the base station VR 1.0. Using a power supply with incorrect voltage or current rating can cause permanent damage to the base station.

  2. Check the power cable: Ensure that the power cable is properly connected to both the base station and the power outlet. Verify that the cable is not damaged and is functioning correctly.

  3. Check for blown fuse: If the power supply is correct and the power cable is properly connected, there may be a blown fuse in the base station. Check for any blown fuses and replace them as necessary.

  4. Check the power switch: Verify that the power switch is functioning correctly. Sometimes, the switch may become stuck or damaged, which can prevent the base station from turning on.

  5. Check for any other damages: If none of the above steps resolves the issue, check for any physical damage to the base station, such as burn marks or signs of overheating. In some cases, high voltage from the power supply may have caused damage to the base station's internal components.

If none of the above steps help you identify the fault, you may need to contact the manufacturer or a qualified technician to diagnose and repair the base station.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...