Ramalam
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Store
Downloads
Posts posted by Ramalam
-
-
Hi,
I'm trying to do motion capturing (via Qualisys M3 cameras) while in VR with Vive Pro running on SteamVR 1.6.10
I've attached a scheme of the room + camera setup. All cameras are attached to a rig beneath the ceiling about 2.7m above the floor.
Red dots = Motion Capturing Cameras
Green dots = Vive Cameras
Blue canvas = Vive Tracking SpaceProblem
The motion capture cameras cause interference with Vive Cameras, when used at the same time.
The Vive Cameras run with 60hz. The Qualisys cameras run with 100-120hz.What could I do, to prevent the Vive and Motion Capturing Cameras from causing interference?
In this thread I've read that IR issues are probably the reason for unstable Vive tracking.
Is there a way to make the Vive Cameras go by a different frequency than the Qualisys Cameras? (from what I know Vive Cameras can only switch between 30 and 60hz)Thanks in advance.
Parallel use of Vive and Qualisys Motion Capturing causes interference
in VIVE & VIVE Pro
Posted
Thank you for your help!
I'm using two SteamVR Base Stations 2.0 and the interference occurs, as soon as I increase the exposure time of the IR-Tracking Cameras (Qualysis). A link cable between both Vive sensors didn't help. You already pointed out, that a modulation of the frequency wouldn't make a change, so would you confirm that there's no chance to let the IR-System and the Vive Sensors operate alternatingly? So that while the IR-Signal stops, the Vive sensors do their sweep?
@Synthesis @VibrantNebula