paul Posted September 2, 2019 Share Posted September 2, 2019 Is there a way I can control the time before the headset goes to sleep after I take it off? So far the only way I have to do it is by going to settings->developers and turning on keep awake but this keeps it on indefinitely. Ideally I would like to be able to set a time out of say five minutes . Link to comment Share on other sites More sharing options...
paul Posted September 2, 2019 Author Share Posted September 2, 2019 Specifically, I am talking about the Focus Plus here. @Tony PH Lin @Cotta Link to comment Share on other sites More sharing options...
HackPerception Posted September 3, 2019 Share Posted September 3, 2019 @paul - I've tagged some members of the WaveSDK team on here for a proper response. I don't believe there is a way to programmatically set idle/shutoff times as power saving options are critical for mobile VR and thus are found pretty low in the tech stack (at the Qualcomm component level). I believe the only way to reliably circumnavigate the power saving modes is to cover the IR proximity sensor (the small window between the lenses) with a piece of opaque tape which will trick the hardware into thinking a user is wearing the HMD thus preventing the headset and the runtime from going idle. @Cotta @Tony PH Lin @JustinVive Link to comment Share on other sites More sharing options...
VRC Posted September 5, 2019 Share Posted September 5, 2019 On 9/3/2019 at 8:31 PM, VibrantNebula said: @paul - I've tagged some members of the WaveSDK team on here for a proper response. I don't believe there is a way to programmatically set idle/shutoff times as power saving options are critical for mobile VR and thus are found pretty low in the tech stack (at the Qualcomm component level). I believe the only way to reliably circumnavigate the power saving modes is to cover the IR proximity sensor (the small window between the lenses) with a piece of opaque tape which will trick the hardware into thinking a user is wearing the HMD thus preventing the headset and the runtime from going idle. Hi @VibrantNebula, @paul I have the same issue. I was wondering, you said it is not possible to delay the sleeping mode since it's a low stack. But is it possible to delay the proximity sensor timer as a workaround ? Thanks! Damien Link to comment Share on other sites More sharing options...
Fangh Posted September 5, 2019 Share Posted September 5, 2019 Hello. I tried to use "Screen.sleepTimeout = SleepTimeout.NeverSleep;" in a Start() function in Unity3D but it does not seems to prevent the headset to go asleep. https://docs.unity3d.com/ScriptReference/Screen-sleepTimeout.html Link to comment Share on other sites More sharing options...
JustinVive Posted September 6, 2019 Share Posted September 6, 2019 @paul, @Fangh, @VRC currently, VibrantNebula's suggestion of covering the IR proximity sensor with a piece of tape is the solution. @Tony PH Lin and I will check with the team to see if there are any software solutions we may be able to offer. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.