Jump to content

Beta_Tester

Verified Members
  • Posts

    238
  • Joined

  • Last visited

Posts posted by Beta_Tester

  1. Did you manage to get this working? There were no diagrams included in your post.

    The connection to the headset relies on multicast broadcasts from the PC. I suspect that when your are connected to the 2nd router, the PC is detecting it as a different network and therefore enforcing a different firewall policy set (assuming you are running Windows firewall and not something else) - which is blocking this multicast traffic. Try disabling the Windows firewall and see if that helps.

    Alternatively your going to have to use Wires hark are something similar to see exactly what is going on.

  2. 14 hours ago, Jim hua said:

    @C.T.D-link R32 AX3200, wired router to PC, good line of sight. But even with USB connection, there's the same problem just less severe.
    @Beta_TesterDo  you experience frame loss with USB connection?

    By the way, when the connection was lost due to frame loss, there's noticeable coil whine... 

    No, it's perfect over USB. Deduced that it appears to be signal-related. When I turn away from the router, the drop outs start happening. Its like my head is blocking enough of the signal to cause dropouts.

    Does it not have a very good antenna?

     

  3. Hello,

    Trying to use Vive Streaming Hub over Wi-Fi with my new XR Elite and I'm experiencing massive frameloss. If I set the configuration to dynamic bitrate it ends up dropping to 20 Mbps and still looses frames. I've upgraded the Vive Streaming app on the headset to the latest version via USB.

    This was not an issue with my Focus 3 on exactly the same setup (PC & router). When using the Focus 3 the experience was rock solid (even at 200 Mbps fixed bitrate).

    Wi-Fi signal is excellent and there is no other heavy use going on. PC is connected via a 1Gbps network card to the router.

    Hope @C.T. or someone can help. Thanks.

  4. 7 hours ago, C.T. said:

    Hey mate, 

    Can you check this artical first to see if the face gasket is locked in place? 
    https://www.vive.com/us/support/vive-xr/category_howto/removing-and-reattaching-face-cushion.html

    "this click is enssential"
    image.png.fe9bd2415a64a9d6b7fed2ec91e9816c.png

    Brilliant. I had read through that article before and I hadn't appreciated that you need to apply quite a bit of pressure to get the click.

    It might be worth getting the article updated to emphasise that.

    Now that's sorted, I'll have a proper go after work...if I can wait that long.

    • Like 1
  5. Hello, I received my new headset today and have been checking it out.

    Unfortunately I am finding it difficult to wear the headset as the face gasket keeps on coming loose (from the bottom). I don't have a particularly prominent forehead but the angle that I need to position the battery cradle for a clear image causes the issues.

    I'd need a different face gasket which has more depth below the eyes, which should stop it working loose. Is there such an item yet @C.T.?

    I have logged this issue with support.

  6. It's a bit difficult to give any advice on this without more information!

    Are all PCs connected into the switch? Can you verify that all the ports are running at 2.5Gb (especially the AP).

    What switch is it? What sort of configuration is on the switch (STP, jumbo frames, flow control etc).

    Is there any sort of QOS/traffic management on the switch or AP?

    Can you verify that all the headsets are actually connected via Wi-Fi 5/6 frequencies?

    Bear in mind that 2.5 Gb on copper connections is in reality much less.

     

  7. On 1/13/2023 at 6:59 AM, Tausendberg said:

    It was literally in the menu when I started up my Focus 3 a couple days ago. 

    Had another look and I couldn't see anything to do with Viveport. Are you on the Focus 3 beta programme?

  8. On 12/13/2022 at 1:28 AM, C.T. said:

    Hope you don't mind I merged your posts.
    Also wondering, how much did it consume on your GPU when you use the ultra mode? 

    @C.T. Just for information, running in ultra mode used about 50 - 85% GPU processing on my Radeon RX 6800XT - even on the most graphically challenging tasks (played HL:Alex and other similar games). Difference in quality is definitely noticeable. Great improvement!

    • Like 1
  9. On 7/28/2022 at 7:01 AM, St. Pinkie said:

    I have been trying to get Vive Business Streaming running on my Vive Focus Plus but despite reinstalling, updating and a factory reset of the headset, launching the app leads to a blank screen and then goes back to the Vive Home. I do not see the streaming PC selector. Is there a fix I need?

    My Focus Plus appears to be on the latest software update, the interface says no updates available for the headset.

    VBS is not supported on the Focus Plus.

    The Focus Plus comes with Viveport Streaming which integrates the SteamVR and Viveport libraries directly into the Focus Plus library. Have you tried using this?

  10. Yeah was thinking this as well. I've just picked up a Focus 3 for a massively reduced price and really wish the headset was targeted to power gamers as well as enterprise. If the official pricing was below the £1k mark, I'm sure it'd gain some traction.

    BTW it is a fabulous headset in every way - far superior to my Cosmos.

×
×
  • Create New...