C.T. Posted December 22, 2021 Share Posted December 22, 2021 VIVE Business Streaming Software 1.06.6– Beta Release Notes Released December 22nd 2021 VBS Console – 1.06.6 [Server] Supported to keep sharpening and bitrate settings after VBS update. Reduced judder and improved smoothness in wireless streaming. Reduced frame loss with refined network transmission. Fixed a BSOD issue caused by audio driver on some computers. Fixed issue that SteamVR doesn’t go into standby mode if launch manually. VBS Client - 1.0.8.11 (update through Vive Business App Store) Reduced judder and improved smoothness in wireless streaming. Reduced frame loss with refined network transmission. Fixed a potential crash issue with sharpening. Link to comment Share on other sites More sharing options...
lalalice Posted December 22, 2021 Share Posted December 22, 2021 With this fix I can join BETA again. ・ VRCHAT by USB streaming cable is very comfortable (In the previous version, it was often returned to the vive lobby) thank you. However, even with this version, it was not possible to connect via wifi. Probably an environmental issue. I consulted with Japanese support, but I couldn't solve this. Link to comment Share on other sites More sharing options...
C.T. Posted December 23, 2021 Author Share Posted December 23, 2021 7 hours ago, lalalice said: With this fix I can join BETA again. ・ VRCHAT by USB streaming cable is very comfortable (In the previous version, it was often returned to the vive lobby) thank you. However, even with this version, it was not possible to connect via wifi. Probably an environmental issue. I consulted with Japanese support, but I couldn't solve this. Would you send me another log, let me check with there's anything we missed. Thanks Link to comment Share on other sites More sharing options...
lalalice Posted December 23, 2021 Share Posted December 23, 2021 (edited) I tried to get the log with an error, but there was no response when I connected the USB in that state. By restarting focus3 from power off, USB responded and I was able to get the attached log. I hope this is valid. Please let me know if you have any other necessary information. I will provide it. RRLog_20211223_213921.zip Edited December 23, 2021 by lalalice Link to comment Share on other sites More sharing options...
C.T. Posted January 10, 2022 Author Share Posted January 10, 2022 On 12/23/2021 at 8:49 PM, lalalice said: I tried to get the log with an error, but there was no response when I connected the USB in that state. By restarting focus3 from power off, USB responded and I was able to get the attached log. I hope this is valid. Please let me know if you have any other necessary information. I will provide it. RRLog_20211223_213921.zip 26.53 MB · 1 download Sorry about the delay, when you fail to connect to WiFi VBS, can you still select the VR Server but it keeps on spinning or it it just won't start? Link to comment Share on other sites More sharing options...
lalalice Posted January 11, 2022 Share Posted January 11, 2022 1.can select VR Server (displayed on vive business streaming "VBS server 192.168.0.14) 2. After a while after selecting, "912 error" 3. Return to the selection screen. The VR Server is still visible there. (1 to 3 loops are possible) Additional Information The IP address of focus3 is 192.168.0.8. The personal computer is connected to WSR-1800AX4S by wire. Link to comment Share on other sites More sharing options...
C.T. Posted January 11, 2022 Author Share Posted January 11, 2022 Got it, please edit the value in below directory, and change RTPPS from 55000 to 1300. After that, restart the console and reconnect again. Let me know how it goes afterward. Thanks, %ProgramData%\HTC\ViveSoftware\ViveRR\RRServer\serverSetting.setting Link to comment Share on other sites More sharing options...
lalalice Posted January 11, 2022 Share Posted January 11, 2022 hmm...I did that, but nothing changed. (No improvement) Link to comment Share on other sites More sharing options...
C.T. Posted January 14, 2022 Author Share Posted January 14, 2022 On 1/12/2022 at 12:56 AM, lalalice said: hmm...I did that, but nothing changed. (No improvement) Just double check, you modified the serverSetting.setting under %ProgramData%, not "program file" right? Link to comment Share on other sites More sharing options...
vrwanter Posted January 14, 2022 Share Posted January 14, 2022 5 hours ago, C.T. said: Just double check, you modified the serverSetting.setting under %ProgramData%, not "program file" right? Can we modify any of these files to increase the wifi streaming bitrate at all? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now