unjay Posted November 21, 2016 Share Posted November 21, 2016 Hello, Where can I find a 3D model of the Headset? The controller 3d files are shared with SteamVR as well as they were provided for the accessory contest. The headset however is available for sale on some 3D stock models sites and I'm not 100% sure if they are accurate. It would make creating accesssories for the Vive a lot easier if we could get a 3D model directly from HTC. Link to comment Share on other sites More sharing options...
Rockjaw Posted November 21, 2016 Share Posted November 21, 2016 Hi . Good question... I'll ask around. It's possible there may be some concerns about sharing this... but I don't know for sure. Will check and let you know. Link to comment Share on other sites More sharing options...
davea0511 Posted December 23, 2016 Share Posted December 23, 2016 Any update on this? I'm creating a number of accessories for it (have already created the accessories for Oculus Rift and Gear VR and others), sure would be nice to have a model. I can't figure out why they'd not share it. You can buy the HMD for months now, and there are tons of tear-downs you can watch for free which would reveal a ton more than a CAD drawing. This seems an effective way to keep people from creating accessories they're creating for other VR devices. Thanks! David Link to comment Share on other sites More sharing options...
Juang3d Posted April 7, 2017 Share Posted April 7, 2017 I´m in the same situaiton, I need a 3d model for an accessory. Can we get it? Link to comment Share on other sites More sharing options...
Todd_9 Posted May 13, 2017 Share Posted May 13, 2017 Me too. 3D models of the headset, controllers, etc. would be very helpful if provided by HTC. I'm designing an installation and I need accurate CAD files. I would think this would be part of basic support for developers. Link to comment Share on other sites More sharing options...
HTC fan Posted July 14, 2017 Share Posted July 14, 2017 I have the same question. Is it possible to get a 3D CAD file for the outside of the VIVE? I'm especially interested in the curvature where the padding velcro's onto the body. Thanks! Link to comment Share on other sites More sharing options...
HackPerception Posted July 14, 2017 Share Posted July 14, 2017 Sorry for not providing a firm answer on this sooner. I'm on the case now and will report back sometime next week about our ability to share the production unit's 3D model. Link to comment Share on other sites More sharing options...
HackPerception Posted July 15, 2017 Share Posted July 15, 2017 I have confirmed with our engineering team that we will not publicly share a 3D model of the Vive HMD. Private message me () if you have futher questions about this matter. Link to comment Share on other sites More sharing options...
davea0511 Posted July 15, 2017 Share Posted July 15, 2017 Thanks for the follow up! Link to comment Share on other sites More sharing options...
Juang3d Posted September 13, 2018 Share Posted September 13, 2018 Can you share a "volume" model? Not a detailed one, but one that is useful to take measurements for doing our own custom projects with our 3d printers, just the volume of it and also de Vive Pro. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.