Satcruiser

This is a male to male cable which is not too sturdy but did the job for what I needed... Amazon.com: Dciustfhe USB 3.1 Type C to Type C Extension Cable 90 Degree FPC FPV Ribbon Flat USB C Cable 3A 10Gbps EMI Shielding,10cm : Electronics

I had similar issues until I started turning the controllers off as suggested above. It would make sense to have the controllers turn themselves off after a certain time of inactivity rather than run out of battery power.

My main use case for the XR Elite is to watch videos in standalone glasses mode. Currently the only 2d/3d video player is the Vive Video player which has quite a few challenges to say the least. Following are some of the issues with the software: 1. Unable to browse for local files at will. When clicking on the local files the software looks for video files in specific locations. If they are not there then nothing is found. This is very restrictive and you have to guess where the system is trying to look for the files. Would be nice to be able to browse the file system at will. 2. It would also be nice to be able to browse for video files on external usb storage devices then you do not have to copy to local storage. 3. When viewing a 2d video there is no way to move the screen forward or backward, just make it larger or smaller. 4. It would be nice to utilize the controller buttons for fast forward/rewind/pause, and be able manipulate the screen size/distance with a single click of a button. 5. Ability to reorient 3d video viewing angle. Currently you must sit horizontally to watch a 3d video. There is no way to move the viewing angle into a comfortable laying down position to watch this type of videos. There is the ability to do this in 2d videos but it takes multiple clicks and is still restrictive. The UI should be more intuitive and allow for such features. 6. This is not a problem with the video player but is related. When I copy video files in usb mode using my PC to the headset the copy often fails due to a timeout since I do not have the headset on. The system should recognize that a copy is in progress and not abort the operation. If HTC fixes these issues the headset will be much more usable. The best and fastest solution would be to get SkyboxVR port their software to the XR Elite.

I managed to purchase a small cable that would fit into the slot and it behaves exactly like the usb c on the top of the battery. It recognized a storage device etc....

Maybe I can ask the question in another way. What is the intent of this port if the opening is too small to insert any standard usb c objects such as cables, memory cards etc... ? Thanks

I have tried many cables to try to connect to the side usb c but none of them fit. The port is recessed and the opening is very small to fit everything I have tried. Any suggestions of what I can use to utilize this port? Thanks

XR Elite does have a small battery for not losing power while hotswap. Take a look at the teardown video.

I reluctantly ended up returning mine. Ran into too many software issues. Maybe if they get fixed I will re-purchase. What a great shame because I had high hopes for this product especially the glasses mode.

Just noticed that part of the accessories for the XR Elite are a set of 3 Temple Pads. This is an excellent idea and it made me realize that you should probably consider making them in 3 different sizes from wide to narrow to accommodate a variety of head sizes.

It is exclusive to the Vive rear battery only. The Vive cannot distinguish between an external battery or a power brick being plugged in, it just knows it has power.

Skybox is the best but I will settle for deovr. I use them both in PCVR (steamVR) mode but it would be nice to have them local.

Is there a simpler way to submit a ticket other than from within the headset? It is time consuming and cumbersome which may discourage users to report issues.

Done.

I did contact support (ticket # 50492674) and they suggested either repair or return to Amazon. I requested an Amazon return and will be shipping it back soon. Also re-ordered another one however it is backordered until May.

Headset was laying on the table in glasses mode and being powered via usb-c. I noticed the fan was still on and when looking through the lenses the dialog for pairing the controllers was waiting for input. I would think that the sensor should take precedence and put the headset in standby mode rather than keep it on indefinitely.

This hub from Amazon works very well with a wired ethernet and power delivery. The XR Elite recognizes the ethernet connection as a tethered usb. It seems to be a bit picky on when to recognize it so just unplug and replug the ethernet cable for it to work. For a portable solution I purchased the Anker 737 power brick.

My unit has two dark spots on the right lens. One is larger than the other and I am unable to determine if it is dead pixels or just dirt inside the lens especially the larger one because it is not quite symmetrical. This is very bothersome since they are close to the middle and are clearly visible on a white/light background. Unfortunately Amazon ran out of stock and I am unable to exchange it, so my only option is to return it and wait for new stock or get it repaired. Anybody else having similar issues?

Totally agree - I had the same problem and struggled with this for 30 minutes and then read your post about it being too dark in the room. As soon as I turned the lights on everything worked. I was about to give up on the software. Please inform people or add a message about the dark environment not just a spinning logo.

There are two problems using the headset in glasses mode. 1. Pinches my nose and partially closes my nasal passages. I have not tried the top strap because I never saw it in the box until you mentioned it. This problem is somewhat minor and after a few minutes I got used to it. 2. Pinching the side of the skull. This is a major issue the head strap cannot fix. The first day I used the headset for several hours and it pinched my skull so bad it is still sensitive and sore two days later. Since the first day I am unable to use glasses mode any more due to the sensitivity of that area. Since then I have been using the battery cradle and it works great as far as comfort but it really defeats the purpose of the main reason of me purchasing the unit which was for the portability of the glasses mode. I would strongly recommend getting this addressed before someone injures themselves.

Games that had issues in compatibility mode were No Man's Sky, Tabletop Simulator, Deo VR , Skybox, Premium Bowling, VR Chat, Subnautica ... it was just about everything I tried both on the released and beta version of the software.

I used a usb-c dongle from Amazon which has power delivery and an ethernet port. The XR elite recognizes the ethernet as a tethered usb port and it works great. Only issue is that you need to connect your internet cable after unit is powered up and connected to wifi.

Same issue here - used the headset for a few hours and now my skull hurts on where the rubber touched my head.

Thank you for the link to the article. For some reason the default controller settings on the streamer app was compatibility mode which made the controllers totally unusable with most games. Once I unticked the box it worked much better.